95 Voyager Timing Marks Alignment 3.0

[Gary59burton]

I put a new water pump and timing belt on my voyager but moved the timing in the process. I can get the marks on the crank and front cam aligned, but the rear cam sprocket will not stop on the stationary mark. It springs past the mark by about two inches. How do I get the sprocket to stop on the stationary mark?

[Gary59burton]

Never mind. I figured it out. I was using a ratchet when I should have been using a pull handle. The van is back together and runs great. No drips. No runs. No errors.

Gary