MP4/4 1:20 Tamiya + Top Studio superdetail

[Harlock_79]

Hello everyone! For a long time I've spent on travel and looking at your models are really any true works of art. I am a total newbie at this modeling and my intention is to finish making 1:12 scale models of F1. I especially love the Ayrton Senna McLaren and of course, the MP4 / 6. That is why I decided to start with the MP4 / 4 to 1:20 scale and detail it with superdetail think of top studio and things do not end up convincing me and others like it nosecone is where I hope your help.

I hope you have a little patience with me because I have no idea how to post photos on the forum or anything, I hope to go slowly learning.

Let me start this journey without thanking spotmodel responses by e-mail that has been offering me, as long as you start doing something new always arise many doubts and now I just have more questions, questions and more questions ...

Well then this starts gentlemen ...

[Harlock_79]

I am currently involved with the diffuser. Whoever brings the Tamiya kit is very thick and so I wanted to put the details of the top studio. The problem is you have to paste a piece of Gravure (diffuser fins) at 90 ° plastic and that's my view almost impossible to hold winglet tried with pliers, but no way. Another solution I'll try it with some blutack while I put araldite or something that makes body because as the cyano simply place the minimum will jump. Once you have all given me will be playing all marranadas sand any remaining glue me I guess. Any advice ???

[Peloton25]

My advice is that you will get a considerably greater response to your thread in the Modeling forums, so I'll be moving your thread over there.

http://www.automotiveforums.com/vbul...lay.php?f=1254

>8^)
ER

[da_ashman]

Welcome to AF!
If your a complete newbie I highly suggest you simply start with an Out of the Box build, before you get stuck into a superdetail set. Superdetail sets are rather complex, require lots of time & can easily put a beginner off.
Good luck!