 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
02-15-2012, 07:45 PM
|
#1 | |
|
AF Newbie
Join Date: Nov 2007
Location: Franklin Park, Illinois
Posts: 34
Thanks: 2
Thanked 0 Times in 0 Posts
|
98 5.0 don't have cam sync tool
I have a 1998 Explorer with a 5.0 V8 and my brother installed the cam synchronizer. I'm getting poor gas mileage and I'm getting a code of P1309. I'm guessing that he didn't set the cam synchronizer correctly, but the problem is the tool is at his house that's 80 miles away. Is there a way to set it without the tool. I read somewhere that the sensor is supposed to be set at 26 degrees after TDC but the procedure was for the 3.0 V6. All I really need to know is if the 5.0 is also set at 26 degrees after TDC or if it is a different number.
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
| Tags |
| alignment , cam , explorer , sensor , synchronizer |
 |
|
|
