Honda RA 272 , Hasegawa 1/24

[Matwej]

Hello everybody.
I decided to show his latest model construction . I started in July 2011.


The Model is not complicated, but it is much simplified. Is missing a lot of detail. I decided to fix this.
I added the front part of the holders of the condenser, modified the condenser and I added the containers for liquids.

The radiator is narrower, since it will not be seen.
After the front of the car was to the rear part of the series. The engine with the gearbox and suspension for the rear wheels. It is the most complex part of the model. The extremely demanding on the accuracy of the construction. Hasegawa makes it more difficult.


To build upper exhaust is very hard. Build you the lower exhausts and settle on the engine with the frame of the suspension of the rear wheels is very very very hard.

[Matwej]

I'm at the end of November. The engine of course, I added a hose, fuel and ignition cables to the spark plugs.


Honda RA272 does not have a (electrical)distributor and spark plugs, but magneto, coils and spark plugs.

The hull of the car I spray with color. The color is Racing White, Zero paints TS1101. Then I added the decals. Everything went well and without problems. Then I put 2 layers of varnish. All I had polished. The rear part of the I'm connected with the front of the car.




The cockpit of the car got hoses and pipes.






Fuel cap I made a new one. I've also added the dashboard on the distribution of electricity and wiring for tacho .
I added the rear roll bars.

Now I'm in the front of the car.
I'm working on connecting rod of the proceedings.




The continuation for a short time.

[Matwej]

Now complete.

[F1Tommy]

Very nice model. That is a great kit. It is more detailed than the bigger Tamiya 1/20th in alot of areas.


Tom Tanner/Scale Designs/Ferrari Expo 2012-Chicago March 17th 2012