01 Windstar rear brakes

[northern piper]

I'm not a "told you so" kinda person... but what you described sounded so much like that which is why my first post on this thread was about delamination. If they were raybestos by any chance, my auto parts place gave me new ones under warranty. You might want to check into that. As for the wheel cylinders, if one of the plungers is stiff or frozen, replace them both. They're super cheap. You can bet you'll also need to do the rigid line behind it up to the flex line unless you're really lucky as they tend to corrode pretty quick. Again, the parts are cheap.

Good luck and let us know how it goes!

[PFA]

I ordered them online last night....pick them up today. Will prob. put on next week.
Thanks

Originally Posted by northern piper

I'm not a "told you so" kinda person... but what you described sounded so much like that which is why my first post on this thread was about delamination. If they were raybestos by any chance, my auto parts place gave me new ones under warranty. You might want to check into that. As for the wheel cylinders, if one of the plungers is stiff or frozen, replace them both. They're super cheap. You can bet you'll also need to do the rigid line behind it up to the flex line unless you're really lucky as they tend to corrode pretty quick. Again, the parts are cheap.

Good luck and let us know how it goes!