![]() |
![]() |
Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
![]() | ![]() | ||
![]() | ![]() |
| Latest | 0 Rplys |
![]() |
#1 | |
AF Newbie
Join Date: Oct 2011
Location: james, North Dakota
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
|
1981 Buick ECM
I have a 1981 Buick Skylark V-6 with an ECM 1224810 CO and I got a replacement ECM 1224810 FX from a 1981 Omega 4 cylinder what do I need to watch for?
John |
|
![]() |
![]() |
![]() |
#2 | |
A990 racer
![]() Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,030
Thanks: 26
Thanked 381 Times in 372 Posts
|
Re: 1981 Buick ECM
You can watch for it most likely not to work, 4 vs 6?
__________________
![]() |
|
![]() |
![]() |
![]() |
#3 | |
AF Newbie
Thread starter
Join Date: Oct 2011
Location: james, North Dakota
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1981 Buick ECM
As far as I can tell both units are the same as it runs fine and is rich on idle and lean on high speed.
John |
|
![]() |
![]() |
![]() |
#4 | |
A990 racer
![]() Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,030
Thanks: 26
Thanked 381 Times in 372 Posts
|
Re: 1981 Buick ECM
The same but is has the the wrong fuel curve?, so now what, they are not caibrated the same, no?
__________________
![]() |
|
![]() |
![]() |
![]() |
#5 | |
AF Newbie
Thread starter
Join Date: Oct 2011
Location: james, North Dakota
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1981 Buick ECM
Could be, but at least it runs leaner at high speed than if you have no computer at all this should save fuel as far as timing I have no idea what it actually does.
John |
|
![]() |
![]() |
![]() |
#6 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: 1981 Buick ECM
If the ECM number is same, should be able to use it....just have to transfer the PROM, or in some cases, there may be a knock sensor "module" also to transfer......
|
|
![]() |
![]() |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|