brake help please for 96 seville sts

[hellishogre84]

i have replaced the crossover hose and brake lines plus the master cylinder bled everything out and i have no pedal when i start the car the pedal goes to the floor i put it in gear and i push the pedal the driver side will stop and the passenger side will stop or keep turning if you pump it up you can get the passenger to stop but usually only for a lil bit before the pedal goes to the floor again the it will start turning i really need to get this car going please help me figure out whats wrong

[xtrapimpy]

have you found a solution to your problem? you need to make sure that when you bleed the brakes you have to bleed ALL the brakes. and when doing this you need to start with caliper the furthest from the master cylinder.... hope this helps some one out there...

[maxwedge]

This usually occurs because the ABS unit must be bled using a scanner.