|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-16-2010, 10:33 PM
|
|||
|
|||
|
1997 3.1L a/c by-pass pulley?
My a/c unit has not worked for several years (blows hot air). I want to remove the a/c compressor and replace it with a bypass pulley. Is this a pretty straight forward repair? Anything special I need to know?
After starting my car this am and letting it warm up for about 5 minutes, I went outside and it was making a 'bell/ringing/chinging' like sound and found the noise was coming from the a/c compressor. I put a little oil between the pulley and the clutch and the noise stopped. MUST drive north in 2 days, so going to attempt the fix myself in 12 hours. 
|
|
#2
11-18-2010, 07:26 AM
|
||||
|
||||
|
Re: 1997 3.1L a/c by-pass pulley?
Nothing special. You'll pretty much ruin your A/C for life once you open it up and leave it exposed to the elements. If that's not a problem, go for it. If you have any hopes for ever getting it fixed, I'd do something different.
Maybe a junkyard compressor and some new o-rings?
__________________
You made three mistakes. First, you took the job. Second, you came light. A four man crew for me? F**king insulting. But the worst mistake you made... ...empty gun rack.
|
|
#3
11-22-2010, 11:25 AM
|
|||
|
|||
|
Re: 1997 3.1L a/c by-pass pulley?
agree with leaving it alone. You just have a clutch plate misaligned a bit causing the ringing.
__________________
1999 Dodge Ram 1500 2WD 5.2L NV3500 1998 Chevy Lumina 3.1L (2010 DIY intake/head job, 2011 DIY A/C replaced, ran like a top til I sold it in 2014) 1999 GMC Sierra 4.3L 2014 Toyota Prius Four
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
