windstar Blend Door Actuator/Video

[jonreyna]

This is a small video how i replaced the blend door actuator for my
2001 windstar, hope this helps you.

http://www.youtube.com/watch?v=2tN2nZjjw_M

[71chevmal]

Will this fix the "skipping" blend door, no heat/A/C condition?

[old89lsc]

This is just what I needed. Front heat just quit working yesterday. Due to my mechanical ineptitude, videos like this make the job a whole lot easier for me.

How many screws hold the bezel? I saw only the bottom ones during removal but it looks like you tightened something in at the top during installation.

[fy171]

there four screws, i just change my after removing bezel i used 1/4 drive ratchet with 2 6 inch ext ,took like 5 minutes to replace

[old89lsc]

Originally Posted by fy171

there four screws, i just change my after removing bezel i used 1/4 drive ratchet with 2 6 inch ext ,took like 5 minutes to replace

Thanks. I also got it figured out by looking at another post. If only every repair was this simple. My Windstar is giving me lean codes, again.