rebulid 1997 ex motor

[btrap97]

i got a 97 honda civic ex non vetec and its d16 motor i wanted to know how it would run if i resized the pistons to a 1.8 and have a turbo and i need info back if anybody gots any ideas thanks

[maxassassin]

well your car would likely not make it to a 1.8 liter you would have to bore it to an 80mm and stock honda sleeve cant achieve this without gettign paper thin. if you wanna achieve this i suggest you use a sleeve set up that can be bore out alot. but even wit hsleeve most can only bore to 78mm which would only yield yo ua 1.7liter motor. youd be in 1000 or better with a sleve set up and custom slug sizes. maybe think b series swap or jsut straight up turbo set up.