|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#31
|
||||
|
||||
|
Re: Re: how to install a tach??
Quote:
I got a Sunpro tach (This one-->CLICK) for my birthday this year, and it needed an adapter for two wires in the engine. Not only were the signal wires really tough to get to, I didnt want to have to do that by myself. Plus, the tach I got only had about 8 inches of wires, so they all needed to be extended.
__________________
MAKE ART, NOT WAR |
|
#32
|
|||
|
|||
|
Re: how to install a tach??
what kind of adapter do you need to install an aftermarket tach in a 98 cav n wer do u get 1 of dem from.
|
|
#33
|
|||
|
|||
|
Re: how to install a tach??
Quote:
http://www.sunpro.com/product_detail.php?pid=16356 heres another good one http://rksport.com/shop/item.asp?itemid=424 i like your name
__________________
2001 Grand Prix GT: cat/u-bend/resonator delete, zzp PLOG, Custom Intake, DHP PCM, 1981 Fairmont 6cyl 3 speed 1978 Ford Ranchero GT 302 with a few goodies |
|
#34
|
|||
|
|||
|
Re: how to install a tach??
The way I did it in my '94 was quite simple, and I assume the 3rd-gen Cavvies will work the same. Even if the car does not have a tach in the gauge cluster, those wacky GM engineers wired the car for it! You have to pull the stock gauge cluster out and find the one lead in the harness that goes to the stock tach. (If you have a factory service manual, and I highly recommend having one, the pinouts will be printed in the back under Chassis Electrical.) Then simply run the positive lead to a SWITCHED circuit (i.e. wipers or radio), run the ground wire, and illumination wire to the dash lights. It's a little time-consuming, but not a hard job.
Good luck! |
|
#35
|
|||
|
|||
|
Re: how to install a tach??
no, bad assumption, you're wrong, that wont work on a 3rd gen
if you would have even read this thread though, you'd see that the question has already been answered, years ago in fact something to remember for next time ![]() welcome to AF!
__________________
2001 Grand Prix GT: cat/u-bend/resonator delete, zzp PLOG, Custom Intake, DHP PCM, 1981 Fairmont 6cyl 3 speed 1978 Ford Ranchero GT 302 with a few goodies |
|
#36
|
|||
|
|||
|
Re: how to install a tach??
hey guys i bought a sunpro tach and the adaptor and it still didnot work right, it was a waste of money and time, the adaptor was $50 at autozone. more than the tach !! I am gonna try the tack lead to the purple wire, i have nothing to lose
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|