|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
03-17-2010, 08:47 AM
|
|||
|
|||
|
98 Camry dead hole
98 camry 2.2 # 3 cyl goes dead after warm up,but is firing,I suspect bad injector Is it possible to switch # 2 #3 to see if the miss follows? Thanks in advance.
|
|
#2
03-17-2010, 11:35 AM
|
||||
|
||||
|
Re: 98 Camry dead hole
Yup, Thats not a bad way to do it at all. Its a lot easier to use an injector testing but not worth the expense for a one time use. There where plenty of times I would swap injectors or if possible pull the rail and see if the injector was firing while cranking.
__________________
|
|
#3
03-17-2010, 02:27 PM
|
|||
|
|||
|
Re: 98 Camry dead hole
Thanks! Will post results tomorrow.
|
|
#4
03-18-2010, 07:47 AM
|
|||
|
|||
|
Re: 98 Camry dead hole
Removed valve cover, 2 13mm bolts that hold the rail, switched # 2 and # 3, started up with scanner attached miss went to # 2 cyl, Got a rebuilt injector from A Zone $69.00 "It's a car lot car" runs smooth now. happy customer!
|
|
#5
03-18-2010, 10:31 AM
|
||||
|
||||
|
Re: 98 Camry dead hole
Good job! Thanks for the feedback.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate"
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
