Radio Code Not Working

[mromer11]

I had to disconnect my battery on my 2003 Honda Accord and the radio asks for a code. The code provided in my car is not working and displays error 1, error 2, etc. Anybody know what I can do? I called the dealership and verified the code by serial number.


Any suggestions?

Thanks

[mpumas]

If you can't get it working, you need to pull the radio and get the serial no. Each radio has a different code and they can tell you by the radio serial no.

[BullShifter]

remove the back-up fuse from the under hood fuse box for 10 seconds, retry code. If it does not unlock your radio may have been switched while it was on the lot prior to sale. Follow mpumas instructions in this case.

Usually when the radio displays Error, the code has been entered wrong.

[AccordCodger]

pull the radio and get the serial no. Each radio has a different code and they can tell you by the radio serial no.

He said he did that. I'm mystified from there.

[mpumas]

He didn't say he pulled the radio and got the serial no from the radio,. .

[AccordCodger]

I called the dealership and verified the code by serial number.

What do you take that to mean?

[ftamike]

Originally Posted by AccordCodger

What do you take that to mean?

question, is it hard to pull the radio out and after you pull it out ,then do you have to call the dealership thanks

[somick]

Originally Posted by ftamike

question, is it hard to pull the radio out and after you pull it out ,then do you have to call the dealership thanks

You need to pay attention to the dates: this thread is FOUR AND HALF years old!

You may call anybody! It depends on what question you have.

Start your own thread if you need a real answer.

Sam

[somick]

Originally Posted by ftamike

question, is it hard to pull the radio out and after you pull it out ,then do you have to call the dealership thanks

See if that will help:

https://radio-navicode.honda.com/

Sam