90 honda crx si total part out....lots of after market parts

[YZ125rider21]

Honda crx si part out list. all prices are or best offer.

B series half shaft out of my b20 that was in my crx. this is what you need for a b-swap in our ef's $30


b series cable VSS already modded the holes for our EF's $40



Honda OEM rear speaker brackets $25


Pro stop rotors by Power Slot with hawk hps pads. have only 1,000 miles on them. rotors costed me $300 and the pads ran around $120. I will take $175 picked up.
link to rotors http://www.brakewarehouse.com/pro_stop_rotors.asp


Honda crx si knuckes/spindles. they both have 2 sets of camber kits on them already for those who are slammed low camber wont be a issue . also the calipers have speed bleeder screws so you dont need two people to do the brakes. www.speedbleeder.com $100


Honda crx exhaust 2 1/4 with high flow cat, resinator, and dynomax turbo muffler ready to bolt on and done with mandrel bent tubing so its all equal through the bends(just need to be weld or flange by the header. $100



Honda dc sports rear lower strut bar. Eye hook broke on one side when I tried to straighten it out but they are cheap to get. $30


Momo steering wheel with hub for crx(one wire is not there on back being i had the nitrous hooked up there when i use to use it but easy to redo it. $100 for the momo wheel with hub or $75 without hub

[YZ125rider21]

more added

[YZ125rider21]

prices dropped and will be added way more parts to list over the weekend. just been busy selling part that i took off already and with school. but keep checking it out. cause i still have tons to take off.

[YZ125rider21]

then i will be selling the shell itself once i take what i want off and will take offers when i post pictures to the ones that live close enough to hall it away

[YZ125rider21]

updated

[YZ125rider21]

prices dropped updated!!!!