Honda CBR400F (Tamiya kit)

[JengWen1023]

完成~~~~!!!!(歡呼~~~~!!!!)
Complete ~~~~!!!!( cheers ~~~~!!!!)






右側來一張~~~!!!
The right side of a photo shoot ~~~!!!





右前方來一張~~~~!!!!
Right in front of a photo shoot ~~~!!!






左後方來一張~~~~!!!!
Making a left-rear of the photo ~~~!!!






三角台特寫，除了前述的把手諸元改造，超過四種類的螺絲也追加上來，另外鑰匙孔也加上去啦~! !
Triangular feature, in addition to the aforementioned handle Moroto transformation, more than four additional types of screws are also up, another key jack is also coupled with Qula ~!!




前輪的浮動式煞車卡鉗~~
The floating front brake calipers ~ ~






側駐車腳架，追加彈簧~~
另外還有一個很有趣的地方，就是駐車腳架上有一塊小小的踢腳板...
實車上確有其物，這件作品除了追加，也做了一點小小的改造...那就是...

Side parking tripod, additional spring ~ ~ There is also a very interesting place, that is, parking there is a small tripod on the skirting board ... Real cars do have their agents, which apart from an additional piece, also made a little transformation ... that is ...






噹噹~~~~!!!!
Dangdang ~~~~!!!!





改完超開心的~!!
End of super-happy to change ~!!





噢~!!耶~!!不多說囉~!!接著是作品欣賞階段啦~!!小弟先謝過感謝各位的回應~!!謝謝大家的肯定 啦~!!
你們的回應，就是給製作者最大的鼓勵~~!!!

Oh ~!! Yeah ~!! Little say Hello ~!! Followed by the Works Stage ~!! I am grateful for the response ~!! Thank you for the affirmation to me ~!! Your response is to give producers the greatest encouragement ~~!!!






























More about the completion of this work photos, please point of reading my blog, thank you ~!!

http://tw.myblog.yahoo.com/wen-1023/article?mid=7048&prev=-1&next=6989

(English translation of the above are using the GOOGLE translation dictionary, if there are inadequate to express, please forgive me, I will strive to understand our message, Thank you.)