|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Non-Performance This is the place to discuss interior, exterior, and other non-performance related modifications. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-28-2009, 12:08 AM
|
|||
|
|||
|
lowering a 2005 cavalier
does any one no what the cheapest and easyest way to lowering a 2005 cavalier.i just painted the car and i think it would look better if it was lowered a little.and how bad would it make it ride.thanks
|
|
#2
12-02-2009, 02:14 AM
|
||||
|
||||
|
Re: lowering a 2005 cavalier
Cheapest and easiest... just cut a bit of the springs out.
Do it right, which is not cheap, but will cause fewer problems. Install lowering springs and have it aligned. Special parts may be required to be able to get the camber correct after lowering it. A drop of 1.4" gives the best handling (control arms parallel to ground).
__________________
'04 Cavalier coupe M/T 2.2 Ecotec Supercharged 14 PSI boost, charge air cooler, 42# injectors Tuned with HP Tuners Poly engine/trans/control arm bushings Self built and self programmed progressive methanol injection system
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
