|
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|
#1 | |
|
AF Newbie
Join Date: Nov 2009
Location: Richardson, Texas
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Alright, I have a 1999 Honda Passport (Isuzu Rodeo) with a 3.2L V6 engine, it seems to be burning oil as i was TWO quarts low when I heard a knocking, I changed the oil immediately and now there is a slight knock which seems to come from the engine at 1500 rpm only, not at idle. The interesting thing is, today I was annoyed enough to just drive down my street in reverse (no knock in reverse) and the knock lessened in sound, and also only occurs now at 2500 rpm in drive. One last part of the scenario, whenever I shut off the engine at idle(no knock) there is one knock, as if something is falling. So is this rod knock or not? Also why has it started to occur at a higher rpm and not nearly as loud?
|
|
|
|
|
|
|
#2 | |
|
AF Enthusiast
Join Date: Nov 2003
Location: Spokane, Washington
Posts: 1,947
Thanks: 0
Thanked 14 Times in 14 Posts
|
Re: Rod Knock?
Check your timing belt tensioner. It's on the right side of the engine under the timing cover. You can usually get the right side timing cover off pretty easily.
__________________
99 Rodeo LS 3.5L Stroker V-6, 4wd, 31x10.5x15 2 inch Trooper lift, Aisin manual hubs. 03 GMC Envoy XL SLT 4x4 5.3L V8 |
|
|
|
|
|
|
#3 | |
|
AF Regular
Join Date: Jul 2004
Location: Walterboro SC, South Carolina
Posts: 241
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Rod Knock?
A bad rod/rod bearing will knock ALL of the time, not just every now and then. Check your belt tensioner. It's a common issue with these.
also, I have no idea what oil you're using but a quality diesel service oil (API CJ-4 rated) will do great in this engine. I use Rotella T but any major oil company diesel oil will be good. The diesel oils still have the detergents in them that will help keep your oil passages clean. Lubrication is critical on the motor so help it out! You won't regret it! Keep check on your oil level. These engines do use some oil and a quuart or 2 between changes is VERY common! (some go thru more)
__________________
2000 Nissan Xterra XS 1989 Isuzu Trooper with a mod or 2 1998 Isuzu Trooper 3.5 with a 5-speed with a mod or 2 1985 Chevy K-10 with a mod or 2 |
|
|
|
|
|
|
#4 | |
|
AF Newbie
Thread starter
Join Date: Nov 2009
Location: Richardson, Texas
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Rod Knock?
Well bad news on this front, the sound has become frequent even at idle, it'll be in the shop in a week. I've got an honest mechanic in mind so I will let you know whats going on as soon as its taken apart.
|
|
|
|
|
|
|
#5 | |
|
AF Regular
Join Date: Jul 2004
Location: Walterboro SC, South Carolina
Posts: 241
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Rod Knock?
Steady knock at idle usually means bearing. (or sometimes wrist pin)
__________________
2000 Nissan Xterra XS 1989 Isuzu Trooper with a mod or 2 1998 Isuzu Trooper 3.5 with a 5-speed with a mod or 2 1985 Chevy K-10 with a mod or 2 |
|
|
|
|
|
|
#6 | |
|
AF Newbie
Join Date: Jul 2009
Location: colmar, Pennsylvania
Posts: 74
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Rod Knock?
my 95 was hammering like crazy it was the belt tensioner it was stuck out so changed out the belt/waterpump and tensioner and idler and new drive belts for $260.00 all better now and purrs like a kitten.and yes they do use oil so keep an eye on it.
|
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
| Tags |
| knock , lifter , rod , transmission |
![]() |
|
|