95 mustang ruuning rich - lean - no power

tex95stang · 10-07-2009, 05:18 PM

I just upgraded my 95 mustang 5.0 liter with a 93 cobra lower and upper intake. the stang was running well before the upgrade, now I have hesitation, sluggish, lack of power. idle goes rough. I have changed plugs, plug wires, replaced ACV, ICV, PVC, set timing. Still same issue. has anyone ran into the same problems I am having?

wafrederick · 10-08-2009, 10:23 AM

I have heard of this on a 1993 Ford f150 doing this with a 5.0 also running like a pig,it was a bad fuel presure regulator

tex95stang · 10-08-2009, 04:04 PM

Quote:

Originally Posted by tex95stang

I just upgraded my 95 mustang 5.0 liter with a 93 cobra lower and upper intake. the stang was running well before the upgrade, now I have hesitation, sluggish, lack of power. idle goes rough. I have changed plugs, plug wires, replaced ACV, ICV, PVC, set timing. Still same issue. has anyone ran into the same problems I am having?

I ran an ECC last night and I have two codes, one stated it was a lean on bank 1 and my egr vavle has low flow (i have elimated the egr valve). I replaced both 02 sensors since one was reading bad. I worked on it very late and will run it today to see if this fixed the problem.

Davescort97 · 10-14-2009, 12:39 AM

Too lean on bank 1 could be a dirty MAF sensor or a vacuum leak in the intake or the PCV valve and hoses. Clean the MAF with electronics cleaner and reinstall. Disconnect the battery for 5 minutes to reset the computer so it can learn the new parameters of your upgrade.

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD