|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Engine, Transmission and Drivetrain Discuss Engine, Transmission, Drivetrain, and all other performance modifications here. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
420a and srt-4 swap
forgive me if i sound crazy but i have heard that you can put the srt-4 motor in the 420a eclipses because the mounts are basically the same and would feet well. i heard it's in the works already. what do you all think?
|
|
#2
|
||||
|
||||
|
Re: 420a and srt-4 swap
the SRT4 motor is backwards compared to the 420A in the Eclipse.
__________________
Dr. Disque - Current cars: 2008 BMW 135i M-Sport 2011 Mazda2 Touring Past cars: 2007 Mazda 6S 5-door MT 1999 Ford Taurus SE Duratec |
|
#3
|
||||
|
||||
|
Some of the older neons (95 to 99 I believe) had the 420a so yes a 95-99 Neon 420a could go into a 95-99 RS/GS or vice versa. The SRT4 engine is not the 420a so it could not be directly swapped.
|
|
#4
|
|||
|
|||
|
Re: 420a and srt-4 swap
if it gets done that would be a nice sleeper though wouldn't it?. and yeah it's backward but i heard something about altering the firewall to make way for the srt's turbo.
|
|
#5
|
||||
|
||||
|
It would be nearly as hard as doing the 4g63 swap. You would still need a different transmission and ecu, among other things. Why not just buy a damn srt-4.
__________________
'92 3000gt SL Zoom Stage 1 Clutch Quote:
|
|
#6
|
|||
|
|||
|
the swap can be done the motor mounts don't line right up, but as for it being backwards my 420a in my 95 eclipse sits the same way as the srt4 in the neon. It would be backwards in a 97-99 when the engine was flipped around.
|
|
#7
|
||||
|
||||
|
Re: 420a and srt-4 swap
Quote:
This is not true. The engine was never flipped around. The 420a eclipse has the tranny on the driver side as does the srt4 motor. However it will take a lot of fabrication to make it work. There is a 2.4 swap for the 420a that bolts right in with the exception of a few pieces. This would be a far better swap than the srt4 motor.
__________________
98 Eclipse GS Turbo Megasquirt 2 - Holset HY35 Turbo - Built motor - P&P Head and Intake - 3" Turbo back - FMIC - Greddy RZ BOV - Walbro 255 - Aeromotive AFPR - 650cc Injectors - Fidanza Flywheel - Zoom clutch - 13" Cobra Front Brakes - AEM WB - Devilsown meth injection - 3.55 Final Drive gear ratio 1981 Chevy Scottsdale 1987 Nissan 300zx - Chump Car 2001 BMW 325i - DD |
|
#8
|
|||
|
|||
|
Quote:
SAMSUNG-SGH-A867/A867UCHJ3 SHP/VPP/R5 NetFront/3.5 SMM-MMS/1.2.0 profile/MIDP-2.0 configuration/CLDC-1.1 UP.Link/6.3.1.20.06.3.1.20.0 |
|
#9
|
||||
|
||||
|
Re: 420a and srt-4 swap
Quote:
Long story short, this thread is over 4 years old and the original posters and responders aren't even on here anymore. Point is, it's just cheaper in buying a SRT4 if you want one. Unless someone could show a writeup or something, you're on your own.
__________________
2013 Chevy Sonic 1LZ Daily Driver, 1.4L Turbo, 6spd 75 Monte Carlo SBC 400 6.6L, Aluminum heads, Hurricane Intake... 12 Chevy Sonic 1LZ 1.8L - Traded 01 Pontiac Grand Am SE - RIP 95 Eagle Talon ESi-T 5spd - RIP 88 Oldsmobile Cutlass Ciera- RIP |
|
#10
|
|||
|
|||
|
Re: 420a and srt-4 swap
ummm ya why would would u want to do a srt-4 swap in to a dsm? that makes no since. just build the gst motor and there you go. forget the srt-4
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|