|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
||||
|
||||
|
95 Park Avenue Coolant Leak
I have a pin hole in the bypass elbow I did a search here for a fix by found only a 99 and up thread, is the 95 elbow replacement similar to the 99 thread?
|
|
#2
|
||||
|
||||
|
Re: 95 Park Avenue Coolant Leak
Base or Ultra? They have two complete different engines.
__________________
Knowledge can be communicated, but not wisdom! ![]() ![]() |
|
#3
|
||||
|
||||
|
Re: 95 Park Avenue Coolant Leak
Sorry base.
|
|
#4
|
||||
|
||||
|
Re: 95 Park Avenue Coolant Leak
Thank for ALL the help!!
|
|
#5
|
|||
|
|||
|
Re: 95 Park Avenue Coolant Leak
The 99 base should be the same.
|
|
#6
|
|||
|
|||
|
Re: 95 Park Avenue Coolant Leak
The 95 will use one long elbow... You can get these cheap in the Help section...
The 95 only uses one elbow, the Tensioner has the other part actually cast to the tensioner... If you remove the tensioner without breaking it you will need a new O ring... If you break the outlet on the tensioner you'll be replacing it.. The replacement process otherwise is quite close to the same as the 99 |
|
#7
|
||||
|
||||
|
Re: 95 Park Avenue Coolant Leak
Thanks very much everyone I replaced the complete tensioner the old one busted on me when I was removing it.
|
|
#8
|
|||
|
|||
|
Re: 95 Park Avenue Coolant Leak
Glad to hear you got it done... Having them break is common on the early gen 3800 II..
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|