Drum Brake pistons wont release :( Help

[country_food]

Whilst i had the Drum off the front right I wanted to see the system in action, Now i understand this was a STuPid thing to do!
The pistons have pushed out further that they are meant to and they wont realease.
I have bled the system of the brake fluid and therefore the pressure but they wont budge.
I Dont know what to do now?

[rhandwor]

Use your finger and lift up the rubber covering the ends of the wheel cylinder. They must be twisted try to push the pistons back in they just have a small spring holding them. Otherwise buy a new wheel cylinder or a rebuild kit.
They have a spring two pistons and two rubber seals and the two end caps.