|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
07-18-2009, 04:18 PM
|
|||
|
|||
|
1979 Camaro and a B+m shifter?
Hi
I am trying to to get my friend's camaro back in working order after previous owner cobbled it together  They put a b+m ratchet floor shifter in, It shifts hard, No b/U lights,start's in all gears. Anyone have a idea how to wire the shifter to the neutral switch and adjust it? On the driver's side of the shifter there is the micro switch with 4 spade connectors, I extended the wires from the switch on top of the steering column to the micro switch! I got b/u lights in rev,drive,2nd,1st, And still start"s in all gear's. Any ideas would be appreciated!! Thank's, Larry 
|
|
#2
07-26-2009, 10:48 AM
|
||||
|
||||
|
Re: 1979 Camaro and a B+m shifter?
you just need to lookup the shifter and make sure you have the right one. there should also be install instructions on their website. or you can call them (B&M). that micro switch is probably your neutral saftey switch.... just needs to be wired correctly.
http://www.bmracing.com/
__________________
 90 Camaro RS V6 - swapped to V8 -350 block, GM Vortec L31 Heads, Edelbrock Performer RPM Vortec intake, 750cfm carb, CompCams XE268 Camshaft ESTIMATED 360-420 hp 380-430lb/ft torque 
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
