4.3 CPI Injector replacement pictures

[jakeyf08]

the pictures dont show up when i view this page...there is just and X...any solution?

[Spectria, L1 MT]

Originally Posted by jakeyf08

the pictures dont show up when i view this page...there is just and X...any solution?

They do when I look at it. Your browser must have a setting that blocks pics from opening.

[laxman21]

no picture her either

[Spectria, L1 MT]

Thisis a test post.

Do you see it now?

[Leeann94astro]

Originally Posted by Spectria, L1 MT

Thisis a test post.

Do you see it now?

Yup, that one works here.

[Spectria, L1 MT]

Originally Posted by BlazerLT

I believe those ports are for your EGR valve gas circulation and not your exhaust and that would explain the carbon buildup from a rich running engine. I wouldn't cause too much of a problem but it will be limiting the EGR gas going into the cylinders. No biggie but make sure you clean it out good. Been noticing any pinging lately?

I know this is late but I just noticed your note about the exhaust ports leading from the head to the intake manifold.

Those are to allow exhaust gas to heat the intake manifold to allow for better atomization of fuel in the intake, otherwize the intake would freeze up and fuel would condense in the manifold and not reach each cylinder.

This method has been used forever on v-engines. Later on they also tapped these ports for the EGR.

It is important that the passage be clean, and the new intake gaskets should have one small and one larger opening for these ports. this allows flow, otherwize the exhaust just comes up and sits in the manifold, condensing and hardening into what you see in the pics.

[jakeyf08]

what injectors and nut kit are recommended?

[Spectria, L1 MT]

Originally Posted by jakeyf08

what injectors and nut kit are recommended?

You need to be more specific, or possibly start a new thread, this one is really old.

The injectors and nut kit for your vehicle are very specific as with all the parts to fit your application.

[jakeyf08]

the last few pictures work but not the original ones

[Spectria, L1 MT]

You need to read the entire thread.
Then start a new one for your issue...

[Leeann94astro]

Originally Posted by Spectria, L1 MT

You need to read the entire thread.
Then start a new one for your issue...

Why would he start a new thread to say the early pictures in this thread don't work?

[carfreak50]

how do you get the pictures up to see them ?