98 Mustang Turn Signal Switch

fordman52 · 06-15-2009, 01:55 PM

My 98 Mustang turn signal switch needs to be replaced. Any one have experience in doing this? Does the sterring wheel and airbag have to be pulled?

Davescort97 · 06-16-2009, 03:25 AM

Welcome to AF!

You have 2 clam shell halves on your column. Check underneath for phillips screws. If you can get the clam shell halves off you won't need to pull the steering wheel. So check down there first. This is the way the multi-function switch is on my Escort. It may be the same on your Mustang.

fordman52 · 06-16-2009, 05:05 AM

I see the screws that take the clam shells apart. The ignition switch also needs removed, how does it come out?

Davescort97 · 06-17-2009, 01:58 AM

Not sure on your Mustang but on mine you disconnect the electrical connection, remove the 2 screws from the ignition key reminder switch and remove the ignition switch mounting screws.

fordman52 · 06-19-2009, 03:47 AM

Thanks for all the info. I was able to replace the switch today in about an hour.

Davescort97 · 06-19-2009, 03:05 PM

Thanks for your reply. Glad you got it fixed. ~Dave~

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD