|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
What tranny fluid?
It calls for GM Syncromesh, but what is everyone else using? I've used redline ATF in the past but figured i'd ask!??
__________________
Eric H (in case you couldn't guess) GT-WC #22 (now #62 and Blue) |
|
#2
|
||||
|
||||
|
Re: What tranny fluid?
Promotion Powertrain, which I consider to be a top notch Tremec dealer told me dont try anything else in the TKO600 use the GM Syncromesh. I trust their knowledge.
__________________
Brian G. 2000 Panoz GTS #420 NASA ST1 427ci Stroker |
|
#3
|
||||
|
||||
|
Re: What tranny fluid?
Amsoil Synthetic Manual Synchromesh
__________________
Brian B. Panoz GTRA - LS1 swap in progress #4 Z06 - NASA ST3/TT3 |
|
#4
|
|||
|
|||
|
Re: What tranny fluid?
Greetings .... I went with all Amsoil products ; very happy ; talk w/ your local distributor for the Prefered Racer Program for a real discount !!!
Paul M. Winship / Chassis #37 |
|
#5
|
||||
|
||||
|
Re: What tranny fluid?
I had no idea there was a preferred racer program... I have the preferred customer discount... I'll have to look into that!
|
|
#6
|
||||
|
||||
|
Re: What tranny fluid?
50-50 Mix of Redline MT-90 and Redline MTL in ours
edit - To answer questions below MTL: 70W80 GL-4 Gear Oil (SAE 5W30/10W30 engine oil viscosity) MT-90: 75W90 GL-4 Gear Oil that’s slightly heavier than MTL http://www.redlineoil.com/products_g...7&categoryID=7 http://www.redlineoil.com/whitePaper/13.pdf
__________________
former part owner GTWC Last edited by g8rbob; 05-26-2009 at 03:47 PM. |
|
#7
|
|||
|
|||
|
Re: What tranny fluid?
Redline MTL
__________________
Kel M Panoz GTRA #17 New Zealand |
|
#8
|
|||
|
|||
|
Re: What tranny fluid?
|
|
#9
|
|||
|
|||
|
Re: What tranny fluid?
how are you guys filling the fluid? hand pump or are you removing the tranny tunnel?
__________________
Eric H (in case you couldn't guess) GT-WC #22 (now #62 and Blue) |
|
#10
|
||||
|
||||
|
Re: What tranny fluid?
I cut a hole in the tranny tunnel and used 4 threaded inserts and then made a cover plate with 4 screws. So I take the cover plate off and use a tranny funnel and fill away....
Otherwise I used to take the tunnel out each time.
__________________
Brian G. 2000 Panoz GTS #420 NASA ST1 427ci Stroker |
|
#11
|
|||
|
|||
|
Re: What tranny fluid?
I use a pump however I like Brians idea of a small axess panel.
David |
|
#12
|
|||
|
|||
|
Re: What tranny fluid?
Like Brian I cut a hole in the tunnel that lines up with the fill plug. I used a hole saw around 1.5" dia. Use a funnel with a piece of tube on it to fill tranny. Then just use black race tape over hole. Due to position you cant really see it.
__________________
Kel M Panoz GTRA #17 New Zealand |
|
#13
|
|||
|
|||
|
Re: What tranny fluid?
great ideas! thanks!
__________________
Eric H (in case you couldn't guess) GT-WC #22 (now #62 and Blue) |
|
#14
|
||||
|
||||
|
Re: What tranny fluid?
Good idea on the access hole... I used a hand pump.
__________________
Brian B. Panoz GTRA - LS1 swap in progress #4 Z06 - NASA ST3/TT3 |
|
#15
|
||||
|
||||
|
Re: What tranny fluid?
Damn, that is a good idea.
__________________
Devin - (aka Panoz26) Formally WC Car # 26, Red Now = WC-GT2 # 211, Black |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|