|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
97 bravada front wheel locking up
the front differential and drive shaft has recently been changed. Now within minutes of driving the vehicle the front drivers side wheel tries to lock up. you can feel the vehicle pull to that side and there is a loud squeling noise. Can the front drive shaft be taken out or the all wheel drive disabled on a permanent basis. I was told vehicle will get better gas milage, and i really don't need all wheel drive, as it is just a work vehicle
|
|
#2
|
||||
|
||||
|
Re: 97 bravada front wheel locking up
I don't recommend removing the front driveshaft...the cutaway pics of the transfer case look like there's a planetary arrangment and will wipeout the viscous clutch, kinda like running with one wheel off the ground on a positraction rear end.
Because you have wheel binding trouble, I believe it needs to go to a shop where the front differential can be checked for proper gear ratio and bearing/output shaft condition. It would be rough if the front wheel broke off while you were traveling. |
|
#3
|
|||
|
|||
|
Re: 97 bravada front wheel locking up
had vehicle in the air in gear. both back and pass. side wheels turn. if brake is slightly engaged front other wheel tries to turn. if motor is revved up the wheel will then turn. when motor idles down, not completely though the wheel will stop. brakes, and calipers are not dragging. it all appears normal. any ideas
|
|
#4
|
||||
|
||||
|
Re: 97 bravada front wheel locking up
Go back to your first post:
Quote:
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|