Bug deflector suggestions for 2000 silv. mounting???

[Dacaprice]

Hi just wondering what bug seflector can i buy that will mount into the factory holes under the hood? do not want to tape. looking at the avs bugflectors

[j cAT]

Originally Posted by Dacaprice

Hi just wondering what bug seflector can i buy that will mount into the factory holes under the hood? do not want to tape. looking at the avs bugflectors

I just went to the auto customizing store and purchased one for my 2000 sil..in 2000...all the holes in the hood lined up fine....

I did have to adjust the hood closure though,,, as the hood was down too far ...

[ukrkoz]

just make sure you have it attached well. they can be very annoying noise producers.

[j cAT]

Originally Posted by ukrkoz

just make sure you have it attached well. they can be very annoying noise producers.

my deflector don't make any noises..it is possible the hood stops need adjustment, as if the hood is allowed to move slightly this could be why...when I installed my deflector the hood latch needed to be raised then the hood stops needed to be raised...

I had wind noise from the windshield left/right plastic trim...I used a heavy black 1.5 inch tape to cover the depression,, this stopped the wind noise at 70mph..