96 olds aurora cant remove idle pulley

[nray]

i drive a 96 aurora been good car do all repairs my self thats probaly why
well on my way to orieleys to get a 74.5 inch serp belt to bypass the a/c compresser the idle pulley broke and the serp belt snaped. MY question is how do you get it off there is some kind of plate in the way pls help

[kris]

Do you have a haynes, or chilton manual? It might be a good thing to pick up, even if you do the work yourself.

[nray]

thanks but already did the job, took about 4 hrs jacked up the engine as high as it would go about 3 or 4 inche and removed the engine mount and plate finaly got room to get pulley and stud out bypassed a/c w/74.5 inch serpintein belt worked great hard job though could not have done it with out every ones help on this web site! BIG THANKS to INDY!

[apollo7879]

Mr Moderator, you are smokin somthing if you think you are going to work on an Aurora with a Chiltons or Haynes manual!!

[BNaylor]

Originally Posted by apollo7879

Mr Moderator, you are smokin somthing if you think you are going to work on an Aurora with a Chiltons or Haynes manual!!

You may have a good point there but no need to make any personal attack. He was just trying to be helpful.

[kris]

Originally Posted by apollo7879

Mr Moderator, you are smokin somthing if you think you are going to work on an Aurora with a Chiltons or Haynes manual!!

So pay for Alldata service. They are better than nothing if you do not have the correct resources.

[89BirdMan94]

misread edited