|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-17-2009, 02:56 AM
|
|||
|
|||
|
1981 Dodge pickup
i have a 1981 Dodge pickup- 4x4/propane pow,r/36ocid. / Automatic it has no passing gear or kickdown. should there be a linkage from crb to trans? or is it something else like cable or electronics. or maybe something else like a bad tranny? show me plz...or maybe something i dont no about---driving me nuts-
|
|
#2
02-17-2009, 09:38 AM
|
||||
|
||||
|
Re: 1981 Dodge pickup
That vintage of Torqueflite should have a mechanical linkage from the carburetor to the throttle valve of the transmission, which is located on the driver's side of the unit, above the left front corner of the oil pan and next to the kickdown band adjustment stud & nut. If the linkage is there, it may have slipped adjustment or the lever may have slipped off shaft. If it's not, scrounge up a replacement and put it on. Driving it this way won't hurt the transmission, it's just a nuisance shifting early without kickdown capability.
__________________
"This car may be old, but it will still climb Kirker Pass at 110!" 1962 Chrysler 300 2-door hardtop/1964 Chrysler 300-K convertible/1964 Chrysler Newport 4-door sedan/1964 Chrysler 300-K hardtop with Firepower 390/2x1964 Chrysler 300-K hardtop/1964 Chrysler 300 convertible/1964 Chrysler "Silver 300-K" with factory 4-speed/1964 Chrysler New Yorker Salon/1980 Dodge D-50 Sport/1986 Lincoln Continental/1989 Honda Accord DX/1989 Lincoln Mark VII BB/1991 Dodge Shadow ES convertible
|
|
#3
02-19-2009, 11:30 AM
|
|||
|
|||
|
Re: 1981 Dodge pickup
I have seen mopars with v8's and the 727 tranny, where the linkage to the tranny wasnt connected anymore - probably after someone worked on the carb & didnt put it back. Also, a replacement carb might not have come with the correct linkage to push on that kickdown control, so it didnt get hooked up again. I've been driving our motorhome for 18 years without the kickdown level being hooked up, because I prefer to do the downshift myself w the lever.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
