|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
01-12-2009, 07:25 PM
|
|||
|
|||
|
98 Sebring Convertible 2.5 V6 -Cam pulley bolts - right or left hand thread??????????
Does anyone know for sure if the cam pulley bolts are normal thread, or left hand? I assumed they were normal, but I have tried a breaker bar and a pulley holder that I made, and they do not want to budge. I am doing the timing belt and water pump, and the cam seals show some signs of minor oil leaking.
Please respond only if you know for sure, as I do not want to twist off a cam pulley bolt!! THANKS 
|
|
#2
01-13-2009, 10:24 AM
|
|||
|
|||
|
Re: 98 Sebring Convertible 2.5 V6 -Cam pulley bolts - right or left hand thread??????????
 Answered my own question.* Regular, normal threads.* I borrowed a "Hillbilly Impact" wrench, which I had never seen.* It is kind of like a impact screwdriver, but works from the side for minimal clearance situations like the cam bolt by the strut tower.* You just put on your socket, and smack it with a hammer!* They both came loose real easy with this tool!!* Hope this might help someone else....
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
