|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-30-2008, 08:26 AM
|
||||
|
||||
|
99 Grand Marquis: Drive Belt Removal
She was diagnosed w/ a bad-bearing in her idler pulley, which looks/sounds like a simple-enough job HOWEVER, I'm having difficulty figuring out exactly how to move ("rotate") the tensioner arm, to get the serpentine belt off. Alldata goes into GREAT detail-- They explain it in ONE step "Rotate the tensioner clockwise and remove the drive belt."(???!!!) Well, I knew THAT-- but, HOW?!
I read a post re: a 1996 Crown Vic, in-whch way2old mentioned a 1/2" "square hole" somewhere ABOVE the tensioner pulley but, I see no such thing... Of course, the eng config on a '96 may have been quite different from my '99. Help, please! ________ MICHIGAN DISPENSARY Last edited by LieutenantCracker; 04-21-2011 at 06:08 AM. 
|
|
#2
12-30-2008, 05:52 PM
|
||||
|
||||
|
Re: 99 Grand Marquis: Drive Belt Removal
Click here for a picture of the tensioner. It is for a CV, but it will be the same. Note the square hole on the back of the pulley.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up.  HEY Y'ALL--READ THIS Here are some of our old vehicles for sale. 
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
