ignition wirers for alarm starter

[igot95]

i have a alarm system with a strter i located my ignition harness its a yellow, orange, red, pink wirers so i connected all my wirers from my alarm strter modual and tryed it the only thing that happened was my acc lights light up and that ding ding noise (like when u put the key in) but the car dosent start after like three dings my acc lights cut off what do i have to do and i already bypassed my vats system do the 95 caprice have 2 ign wirers o yea do i need to install the immobalizer for the car to strt

[gatoratoy227]

yeah that may help if thats not installed it won't act right or not even start (like in your case) the immobilizer is there so no one can just get into your car as its warming up and drive off and if its not connecting and sending a signal through every thing it needs to it won't act right at all

[igot95]

ok im going to install that so what am i suppose to do with the second ign wire comeing from the remote strter

[gatoratoy227]

if you can post a pic of what you're working on i'll be able to get a better idea of whats going on

and if there is a secong wire it may go to a wireless transmitter as i said i'm shooting in the dark here

a pic would deffinently help

[igot95]

what do u want the pic on the immobalizer or my wiring harness in the car

[ponchonutty]

Go to www.bulldogsecurity.com and look up the wiring info on your car. Double check your wiring and if it looks OK, put the VATS system back the way it was before you touched it, stick the key in the ignition then try to remote start it. If it works, your bypass is messed up.

[igot95]

my car starts with the key but not the remote strter so its not the vats

[ponchonutty]

Again if the bypass is messed up, it won't start with the remote starter. That's why you should put the system back to normal and try to remote start it while the ignition key is in the ignition. If it doesn't start then you'll have to double check your ignition wiring or remote starter programming.

[igot95]

ok im going to try that

[igot95]

well its wasnt my vats i think i need to install the starter kill relay

[ponchonutty]

What? The starter kill relay is only to disable the starter when the system is armed. Tell me, what brand unit is this???

[igot95]

I Got It Kno I Had To Ground The Neutral Wire But Now I Need To Connect The Tach Wire What Is The Ez Way Do I Have To Go Though The Firewall To Get The Tach Wire I Heard Of The Pcm Way But Dont Kno What That Is