|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
hi i like to know if the filter is bad or if the tranny is gone?
when you put it in gear to drive forward it slips u can stomp on the gas and only moves slowly, havent tried 1 2 just OD and Reverse works fine any help on this one? its a 3.3L engine |
|
#2
|
|||
|
|||
|
Re: 91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
for me there was magnet semi blocking main suck up tube that dont fix it ebay sells ob1 scanners like 40 bucks give or take watch tcm or solenoid packs know to go wrong less often in 3 speed 4 speed night mare
__________________
you"ll be alright
|
|
#3
|
|||
|
|||
|
Re: 91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
ok u lost me after the getting the obd1 reader what do u mean by that? so then what would it be? if it isnt the magnent blocking? but wouldnt that cause problems for reverse too if the main suck up tube was blocked?
|
|
#4
|
|||
|
|||
|
Re: 91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
in filter there is one oval hole huge back there is a hole main suction line for tranny sometimes filter falls down and magnet moves in to hole scanner would tell electrical or mechanical like solenoid pack check pack or ecm to go bad
__________________
you"ll be alright
|
|
#5
|
|||
|
|||
|
Re: 91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
ah ok i think now if ithe filter is fine and magnet still on the tranny cover
then how would i check this at u mentioned "would tell electrical or mechanical like solenoid pack check pack or ecm to go bad" |
|
#6
|
|||
|
|||
|
obd scan would tell you about mechanical or you can turn key on 3 times on off then leave it turned on engine light will blik fast then pause blink again so tells trouble code if any computer has in it
__________________
you"ll be alright
|
|
#7
|
|||
|
|||
|
Quote:
__________________
you"ll be alright
|
|
#8
|
|||
|
|||
|
Re: 91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
ok i tried the key thing no errors just 55 which is end of codes,. so if it isnt the filter and if it isnt the soilnode what would it be
but i havent checked the filter yet gonna do it when its not raining but if it was fine what else could it be |
|
#9
|
|||
|
|||
|
Re: 91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
forgot to add my mom was telling me
when she gas's the engine and isnt going anywhere just going really slowly she lets off the gas and goes back on the gas and it fixes itself usually and drives fine till she comes to a stop sign then sometimes she can drive and sometimes she cant sorry for being late on that not sure if that helps my situation or not |
|
#10
|
|||
|
|||
|
Re: 91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
book say 55 is completion offault code display on check engine lamp
Quote:
__________________
you"ll be alright
Last edited by littlebitofinsanit; 09-27-2008 at 08:54 PM. |
|
#11
|
|||
|
|||
|
Re: 91 Voyager 3.3L Forward Gear Slipping Reverse Works Fine
ok ill try that when it acts up again as its driving fine now ugh figures eh
so it has a bad known computer? soo then with the computer being bad it will short out the solidiones so they wont work i didnt even know it had electronic shifting on this thing |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|