3.8 Water Pump

[Corndog Man]

Removed all but one bolt and need to remove the power steering pulley. My GM manual has a number of tools to do the job. I went to the local parts store and borrowed/bought a puller. It would work but its about an inch too long. Don't laugh. :-) Any recommendations where I can buy a power steering pump pulley removal and installation tool that can be used on a Lumina with a 3.8?

Thanks!

Corndog Man

[maxwedge]

If you loosen the pump and move it forward you will be able to just get that bolt out of the way without completely removing it.

[Corndog Man]

Originally Posted by maxwedge

If you loosen the pump and move it forward you will be able to just get that bolt out of the way without completely removing it.

Thanks I will give it a try

Corndog Man