|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#16
08-03-2008, 09:45 PM
|
||||
|
||||
|
Re: rear end
The VIN will not contain any information aside from giving GM a go point if their information goes back that far and the car is original.
There is a decal under the decklid with a listing of RPO and SEO codes - called the Service Parts ID or SPID label. This will give you the codes that are specific to what was installed in the vehicle. These are 3 digit alphanumeric codes (such as Z24, Z28, 9C1 etc) that pertain to certain options installed on the car. The codes you are looking at all start with a "G", but they might not all be present. 2.56 gearing is GU1 8.5" is G87 7.5" is G89 Limited Slip (Positraction) is G80
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at http://www.silicon212.org/9c1! 2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness! 1967 El Camino L79/M20 old school asphalt raper Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have. 
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
