|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
07-26-2008, 02:01 PM
|
|||
|
|||
Front end torque specs on 96 Grand Caravan
 Can anyone help me? I need torque specs on the nut on the tie rod end, the bottom bolt on ball joint and the axle nut. They are on a 96 Dodge Grand Caravan and it is front wheel drive with 3.3 l motor.
|
|
#2
07-26-2008, 06:05 PM
|
||||
|
||||
|
Re: Front end torque specs on 96 Grand Caravan
As listed in the 96-98 Haynes Dodge, Plymouth, Chrysler Minivan manual #30011
Driveaxle/hub nut >>>>> 180 ft lbs (tighten with brakes applied) Tie-rod end to steering knuckle >>>>> 40 ft lbs Balljoint stud to steering knuckle pinch bolt nut >>>>> 100 ft lbs
__________________
**We took the time to answer your post. Please give us some time and post the fix. It will help hundreds. **Follow prescribed safety practices before attempting any procedures. Doubts? Consult a maintenance manual. 07 Fusion / 06 RAV4 / 06 Accord / 96 Gr Caravan
|
|
#3
07-26-2008, 07:59 PM
|
|||
|
|||
|
Re: Front end torque specs on 96 Grand Caravan
Hey, man, thanks for the info. It was a great help!
|
|
#4
07-27-2008, 12:50 AM
|
||||
|
||||
|
Re: Front end torque specs on 96 Grand Caravan
__________________
**We took the time to answer your post. Please give us some time and post the fix. It will help hundreds. **Follow prescribed safety practices before attempting any procedures. Doubts? Consult a maintenance manual. 07 Fusion / 06 RAV4 / 06 Accord / 96 Gr Caravan
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
