|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-05-2008, 03:55 PM
|
||||
|
||||
|
'97 GM Headlight Replacement
I'm considering getting replacement headlight assemblies for my wife's '97 GM. The old ones are very cloudy, I've polished them out which works for a while.
How hard are they to replace? One online source of them recommended having them done by a body shop. I'm pretty capable, just not on familiar ground with this type of work. Thanks, Bob 
|
|
#2
05-05-2008, 07:26 PM
|
||||
|
||||
|
Re: '97 GM Headlight Replacement
The assemblies are easily replaced. There are 2 clips that need pulled up on each assembly. You will need to adjust them when the new ones are installed. Remove the plastic radiator cover and you will see the buckets. Look fot the clips and remove them. Then pull buckets out. Install same way. Good luck.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up.  HEY Y'ALL--READ THIS Here are some of our old vehicles for sale. 
|
|
#3
05-06-2008, 05:54 AM
|
||||
|
||||
|
Re: '97 GM Headlight Replacement
Yeah, you will be surprised how easy it is to change them out.
__________________
|
|
#4
05-06-2008, 06:50 AM
|
||||
|
||||
|
Re: '97 GM Headlight Replacement
See if this might help. Picture is not great, but it is all I have.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up. HEY Y'ALL--READ THIS Here are some of our old vehicles for sale.
|
|
#5
05-06-2008, 07:59 PM
|
||||
|
||||
|
Re: '97 GM Headlight Replacement
Not sure on 97 but on my 98 I had to buy a special wrench to adjust them. It was a tiny ratchet wrench. I think it was a 4MM.
__________________
HERS---> 2006 Grand Marquis GS (replaced my 1998 w/cracked manifold) HIS----> 2003 Dodge 1500 HEMI QC 4X4
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
