|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-28-2008, 02:18 PM
|
|||
|
|||
|
Installing a 350 #1806 Edelbrock Carburator
I am putting a 350 engine in my 84 Monte.
I also need to install a Carberator. I bought a #1806 Edelbrock. However, I am not familiar with installing a carb. on an engine. I put the 350 in my last Monte, but never had to replace or rebuild the carb. Can anyone help me out with any tips, etc...
__________________
Thanks and talk to you soon, Rhuda 
|
|
#2
04-28-2008, 02:57 PM
|
|||
|
|||
|
Re: Installing a 350 #1806 Edelbrock Carburator
Welcome to AF, exactly what in the R and I of a carb are you stuck with, 4 bolts, make up a fuel line, linkage issue should be addressed with the carb kit if not a direct fit. Probably an electric choke, one wire fed by the key on only circuit. Question is too general to accurately answer.
__________________
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
