torque spec for rear hub bolts

[sirdeeker]

Does anyone have the torque spec for the rear hub bolts in a 2002 impala? It has rear caliper brakes (not drum). I bought new Timkin bearings but they didn't include the torque spec for installation.

[sirdeeker]

Found it. 52 foot-lbs.

Jack up.

remove wheel.

remove rotor (hang caliper).

unplug abs sensor.

remove 4 bolts holding hub to control arm.

remove hub and dust shield(held in by same bolts).

clean off mounting location on control arm.

reinstall dust shield and new hub and torque bolts to 52 ft-lbs.

plug in abs.

reassemble brakes and mount wheel.