|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Eclipse Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
02-19-2008, 02:11 PM
|
|||
|
|||
|
drive belt pulley bracket
Ok guys I have a 98 Talon 420A. The adjustment bolt on the ps/ ac pulley broke off and is still stuck in the mounting bracket! Where in the world can I find this bracket? I've checked with junk yards and they don't have it because it's always attached to the engine when they pull them. And dealers want 300 for this little bracket. Any ideas would greatly be appreciated!
|
|
#2
02-19-2008, 02:19 PM
|
||||
|
||||
|
Re: drive belt pulley bracket
You might could find one on ebay.
Why dont you just get the bolt out and put another one in.
__________________
98 Eclipse GS Turbo Megasquirt 2 - Holset HY35 Turbo - Built motor - P&P Head and Intake - 3" Turbo back - FMIC - Greddy RZ BOV - Walbro 255 - Aeromotive AFPR - 650cc Injectors - Fidanza Flywheel - Zoom clutch - 13" Cobra Front Brakes - AEM WB - Devilsown meth injection - 3.55 Final Drive gear ratio 1981 Chevy Scottsdale 1987 Nissan 300zx - Chump Car 2001 BMW 325i - DD
|
|
#3
02-19-2008, 02:29 PM
|
||||
|
||||
|
Re: drive belt pulley bracket
Take a drill and drill a hole through the broken bolt and pop that shit out! Use a metal drilling bolt though so it'll cut right through it while spraying with WD-40. Did that to the whole front of my car when i had the accident. All the bolts were so rusty they broke inside the nuts.
__________________
2013 Chevy Sonic 1LZ Daily Driver, 1.4L Turbo, 6spd 75 Monte Carlo SBC 400 6.6L, Aluminum heads, Hurricane Intake... 12 Chevy Sonic 1LZ 1.8L - Traded 01 Pontiac Grand Am SE - RIP 95 Eagle Talon ESi-T 5spd - RIP 88 Oldsmobile Cutlass Ciera- RIP
|
|
#4
02-19-2008, 05:50 PM
|
||||
|
||||
|
Re: drive belt pulley bracket
I agree with all the previous posters. I wouls suggest you drill it out, and then hopefully replace the screw. The bracket should be fine when you drill the bolt out.
__________________
'98 Contuor SE, 2.5 V6 Auto Silver '08 Altima 2.5S, Auto Super Black
|
|
#5
02-19-2008, 08:39 PM
|
|||
|
|||
|
Re: drive belt pulley bracket
yeah thats what it looks like. the hard part is getting it off the engine-ill have to take it to a shop because i dont know how to do it.
thanks guys and gals!
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
