|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
93 Bonneville Keyless Entry Programming
Would someone PLEASE tell me how to program a wireless remote key fob for a 93 Bonneville SE??? It would be SINCERELY appreciated.
[email protected] (included my email because I don't have a lot of luck navigating on forums )
|
|
#2
|
||||
|
||||
|
Re: 93 Bonneville Keyless Entry Programming
Welcome to AF! Fortunately, your car is quite simple to program. Jump the (ALDL) Assembly Line Diagnostic Link. You will find this connector under the driver side dash, but you will have to look through a square cut out in the panel to see the connector, it is recessed behind that panel, almost directly under the steering column.
Jumper pin A to pin G with a fused jumper (3A) Doors will lock and unlock Press the UNLOCK button on the remote Doors should lock and unlock again if you have more remotes press their unlock button (up to 4) remove jumper wire ________|________ [F] [E] [D] [C] [b] [A] [G] [H] [J] [K] [L] [M]
__________________
Knowledge can be communicated, but not wisdom! ![]() ![]() |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|