-
Go Back   Automotive Forums Car Chat > Chevrolet > Avalanche | C&K | Silverado | Suburban | Tahoe > Tahoe
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 01-10-2008, 03:53 PM
Denali Denali is offline
AF Newbie
 
Join Date: Feb 2004
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
03 Tahoe Brake Warning Light

Hallo,
my 03 Tahoe started showing the red Brake Warning light. But it doesn´t come up with full brightness (like it does when I just turned the Ignition on). The Warning Light only illuminates a little bit. When I apply the parking Brake it illuminates full, after release of parking brake it is slightly on again. After removing the Battery Power for a minute the light seems to be reset and it stays normal for about 1 week. Does anybody have an Idea what tis means ?
Reply With Quote
  #2  
Old 01-10-2008, 04:26 PM
MT-2500's Avatar
MT-2500 MT-2500 is offline
AF - Advisor
 
Join Date: Sep 2005
Posts: 16,690
Thanks: 5
Thanked 122 Times in 121 Posts
Re: 03 Tahoe Brake Warning Light

Check brake fluid level. Top off to full mark if low.
I think there is a low fluid level switch on bottom or underside of master cylinder.
For a test on switch unplug it but do not drive it with it unplugged.
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
Reply With Quote
  #3  
Old 01-14-2008, 03:29 PM
Denali Denali is offline
AF Newbie
Thread starter
 
Join Date: Feb 2004
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 03 Tahoe Brake Warning Light

Thanks for the help. I checked the reservoir and it is at the FULL Mark. When I remove the electrical connector under the Master Cylinder nothing changes. I just wonder why the Warning Light is illuminating with a very low intensity. I assume this Light is either ON or OFF completely but not somewhere between ? Or am I wrong ?
Reply With Quote
  #4  
Old 01-14-2008, 04:28 PM
MT-2500's Avatar
MT-2500 MT-2500 is offline
AF - Advisor
 
Join Date: Sep 2005
Posts: 16,690
Thanks: 5
Thanked 122 Times in 121 Posts
Re: 03 Tahoe Brake Warning Light

Quote:
Originally Posted by Denali
Thanks for the help. I checked the reservoir and it is at the FULL Mark. When I remove the electrical connector under the Master Cylinder nothing changes. I just wonder why the Warning Light is illuminating with a very low intensity. I assume this Light is either ON or OFF completely but not somewhere between ? Or am I wrong ?
They have several britness to them.
Depending on what is tripping it.
A emg brake switch test is to step on emg brake and if light gets brighter the emg brake light switch is working.
You might try unpluging you abs control unit to clear codes or pulling fuse.
Also check for any abs codes or brake light switch codes.
Good luck
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
Reply With Quote
  #5  
Old 03-01-2008, 06:13 PM
Denali Denali is offline
AF Newbie
Thread starter
 
Join Date: Feb 2004
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 03 Tahoe Brake Warning Light

Just an Update: It turned out to the Instrument Cluster had a failure. I got a new one from the dealer and the Brake light stayed off (Certainly it comes on when ignition is on and during apply of Parking Brake). So my brakes are OK.
Reply With Quote
  #6  
Old 03-01-2008, 06:40 PM
MT-2500's Avatar
MT-2500 MT-2500 is offline
AF - Advisor
 
Join Date: Sep 2005
Posts: 16,690
Thanks: 5
Thanked 122 Times in 121 Posts
Re: 03 Tahoe Brake Warning Light

Thanks for posting back the fix and how it went.
Glad you got it figured out.
Did the dealer tie on any on it?
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Chevrolet > Avalanche | C&K | Silverado | Suburban | Tahoe > Tahoe


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:24 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts