sedan bumper on hb

[topdawg57]

will the 4g sedan bumper's fit on a 4g hb?

[slammed89civic]

Aanything can fit with extensive modifications.......but the answer is no it doesnt bolt up, and believe it is wider, plus why would you want a sedan front bumper they make buch better ones for our cars!

[topdawg57]

well i have a standard hb,just thought if i found some for cheap wuold they fit.i want aftermarket but no fiberglass any suggestion's beside's wingswest.

[slammed89civic]

honestly, i want the blitz urithane front, wings west fiberglass sides (cheaper than the urithan, and they dont ned to be flexable) and a streetfighter rear bumper, it would make for a good combo

[Melt]

Originally posted by slammed89civic
Aanything can fit with extensive modifications.......but the answer is no it doesnt bolt up, and believe it is wider, plus why would you want a sedan front bumper they make buch better ones for our cars!

:finger: LOL they make better ones for the sedan because its a "family car" therefore it had to have better safety ratings

[amy@af]

Originally posted by topdawg57
will the 4g sedan bumper's fit on a 4g hb?

not bolt on. but anything can be made to fit. i once knew a 4 door with 5th gen projectors and a crx front bumper. anything is possible.

a side note. i once heard the lip doesn't fit the 4 door either. false. i took the lip (only thing that didn't break in the wreck ) off my busted up 89 Si bumper and held it up to the 89 Lx bumper and it fits like a glove. i think i'm gonna mount it on the car tomorrow. so, all you 4 door owners out there...you CAN fit the front lip on. note: you can get the lip brand new from your local honda dealership for $60-ish :jump:

ami

[GTA]

I want a si lip ... Did you ever fix the bumper lights on the 4dr Ami? I still got my stock set if ya need em.

[Melt]

Originally posted by LadyNRedSi


not bolt on. but anything can be made to fit. i once knew a 4 door with 5th gen projectors and a crx front bumper. anything is possible.

a side note. i once heard the lip doesn't fit the 4 door either. false. i took the lip (only thing that didn't break in the wreck ) off my busted up 89 Si bumper and held it up to the 89 Lx bumper and it fits like a glove. i think i'm gonna mount it on the car tomorrow. so, all you 4 door owners out there...you CAN fit the front lip on. note: you can get the lip brand new from your local honda dealership for $60-ish :jump:

ami

I should try to get a cheaper front lip at the junkyard. I will go there and tell em I will give em $25 straight up cause I can get a new one at the dealer for $60, cause a front lip would be tight.

What happened to the si? There is one of two reasons I dont know,
A) you never told us
B) I wasnt paying attention

Lemme know . . .

[amy@af]

Originally posted by Melt

What happened to the si? There is one of two reasons I dont know,
A) you never told us
B) I wasnt paying attention

Lemme know . . .

yea, where were you? this past Dec i crunched it. my best friend died suddenly...i was thinking about that and not paying attention. rest is history. pics

i'm pretty bent on myself. i was going to go jdm front end. my car was on the frame rack 5 hrs (all rack time...none of the dismantle time shop's try and charge) and it still didn't line up right. so i went with the stupid kit (no predrilled holes) and made it fit. :cry: i miss the way it used to look.

so there ya have it folks. moral of the story? don't think and drive :licker:

[Melt]

yea, where were you?

not here, but I have seen those pics, hard to believe I have only been a member of this forum for about 4 months now

Registered: May 2002