tranny swap

[cheap_jeep88]

yes i have a 92 bonneville that i blew the tranny in. i picked up a tranny out of a superchargeded 95 bonneville. i was wondering if that will bolt into my car with few modifications. and i also have a spercharger that i would like to put on my motor it came out of an supercharged bonneville. it was a 94 class 2 supercharger i know i have to change the intake. and maybe the injectors. and pulleys. if here is ayhing else would someone plz tell me. i need the help

[cheap_jeep88]

bump

[Jrs3800]

The trans from the 95 will have a different pin out arrangement and instead of using a Temp switch the 95 uses a Temp sensor that will also have to be changed out.. Also its will be a 2.97 Gear ratio.... You may have a 2.84 or 3.06..

I would not recommend trying to get the SC components to work on your engines.. In trying to make it all work it may be easier and cheaper to get a Complete Engine/Trans/PCM and wiring harness..

The L27 Tuned Port is a good engine... But the L67 Rods, wrist pins and pistons aren designed with Boost in mind... The L27 internals are not..

I am not saying it can't be done... It can.. But after what I have seen you'd be better off saving for a supercharged car or a complete drop out