|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-11-2007, 02:14 PM
|
||||
|
||||
|
setting up and tuning safc
how hard is it to set up one and tune it. what do i need to monitor to know im have the rite mix, a timimg monitor? and is there any use for it if u have the stock fuel pump thats not hotwired? will it help?
__________________
Black 96 3000Gt Vr4 58k mi, H.H.H. Data logger, RPS MAX, Big16G/14b Combo, FMIC, AEM EUGO, Greddy EBC, SAFC II, 560's, hotwired 255lph, not cats, Solid motor mounts, Faze boost gauge, Apexi turbo timer, full exhaust with 3" ICH Single shot Catback, K&N Air Filter, Front upper strut brace, T-Case Bracket, AC delete, Meth injection, NGK stg 1 colder, 8k HID'S. AIMING FOR 500+AWHP at ips dyno. 
|
|
#2
12-11-2007, 03:21 PM
|
||||
|
||||
|
Re: setting up and tuning safc
if your running the stock injectors then no. the stock ecu knows more then you. Even with a hotwired/upgraded fuel pump, the FPR does that job. If you upgraded injectors then yes get a safc and you can prob turn up the boost and tune. To tune you will need a datalogger and even better a wideband 02 sensor.
Coop
|
|
#3
12-11-2007, 05:31 PM
|
||||
|
||||
|
Re: setting up and tuning safc
yeah.. what he said.. haha I have halo dattaloger and it is sick! I like it a lot.. but with you being the hybird you might want to look into some other options.. If you do decide to go with bigger injectors I would get the SAFC.. are you staying with stock turbos? if so I would say get some 450cc injectors..
Jason
__________________
Add me on Facebook!! Add Me on Myspace!! I am on Twitter.com too!! add me as a freind on Digg!! check out CCOTM!
|
|
#4
12-11-2007, 09:44 PM
|
||||
|
||||
|
Re: setting up and tuning safc
ok so i can hot wire my fuel pump and turn my boost up to 15 with out the need of bigger injectors and i dont need an afc? im staying with the stock turbos, the stock turbos can only boost 15psi correct?
__________________
Black 96 3000Gt Vr4 58k mi, H.H.H. Data logger, RPS MAX, Big16G/14b Combo, FMIC, AEM EUGO, Greddy EBC, SAFC II, 560's, hotwired 255lph, not cats, Solid motor mounts, Faze boost gauge, Apexi turbo timer, full exhaust with 3" ICH Single shot Catback, K&N Air Filter, Front upper strut brace, T-Case Bracket, AC delete, Meth injection, NGK stg 1 colder, 8k HID'S. AIMING FOR 500+AWHP at ips dyno.
|
|
#5
12-11-2007, 11:01 PM
|
||||
|
||||
|
Re: setting up and tuning safc
I have stock turbos on my red 3kgt and I am hitting 19 psi then droping to about 13.. I have 450cc and a SAFC...
Jason
__________________
Add me on Facebook!! Add Me on Myspace!! I am on Twitter.com too!! add me as a freind on Digg!! check out CCOTM!
|
|
#6
12-12-2007, 03:08 PM
|
||||
|
||||
|
Re: setting up and tuning safc
Quote:
Coop
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
