Soo i need a New bumper..

[JCL82]

I kinda hit someone and i need a bumper, What's a good place to buy one ? Also i was thinking since i'm replacing the bumper , is there is updates i can do to the frontend ? Like different type of bumper,grill,install fog lamps some how. Anyhow i check on ebay thats the only place i have checked soo far it looks like i can get one for $200 dollars..

[OGG]

PIAA makes a nice lower fascia with foglights built in but it's not cheap.
You're lucky. The front bumper is half the cost of a rear. I backed into a tree and bent my bumper pretty badly(hit it on the corner). A complete rear bumper assembly is ~$400

[rjeffery]

I just added a set of Hella FF75 Fog lights and a set of FF75 driving lights to my factory valence. Fogs on the outside, driving on the inside. Pretty nice upgrade I think.

[JCL82]

Can you guys give some links ?

My bumper only has like a 12 inch dent on it, but it's mess up on the side. Crazy thing is it's my fault but it isn't. We both was stop behind a stop sign waiting for traffic to clear ,the road has 3 lanes, well the lane next to us is clear she guns the car to go, well when i see that i look to the left and see it's still clear, it is soo i gun it , but before i can stop i hit her. Well after we exchange info, we get back on the road and i let her pull off first and she goes into the middle lane. So the reason why i think she stop is because if you get on the lane that is next to us you will have to make a right hand turn on another road, if you can't get over to the middle lane. So i figure she change her mind about taking the lane next to us and stop again to get to the middle lane.

[Silverado6x6]

I backed into a piece of heavy equipment at work this summer on my 02 3500 and had to replace it, I didn't know my truck was actually an HD version as the parts were different, I sprayed all inside areas and thosed covered in plastic with a pure zinc anti corrosion spray, though GM has gotten better at corrosion resistance I still have er sorta have whats left of older pickups. so any time S work on body panels, doors, tailgates like the new one i just put on I generously use zinc sprays with an extension hose to get into all the areas.