turn signal problems

[Galuple]

i recently got into a fender bender with an xtera and had to have the front bumper and hood replaced. since i've gotten my 92ex back from the shop i've noticed that the left turn signal is flashing twice as fast in the back and not at all in the front. does anyone have any suggestions? would this be a quick fix?

[Copytech99]

The system will flash quickly to alert you of an open filament in one of the bulbs (hopefully) Check the bulb that is not flashing at all first.

[Galuple]

Originally Posted by Copytech99

The system will flash quickly to alert you of an open filament in one of the bulbs (hopefully) Check the bulb that is not flashing at all first.

so a quick replacment of the bulb ought to do it?

[CivicSpoon]

did you replace the bulb? Usually if a front turn signal is out, the rear will flash like that. And if a rear turn signal is out, the front will flash like that. Otherwise, check the wiring harness to see if a wire was cut.

haha guess I was too slow to respond.

[Galuple]

right i think that this should fix it. thanks guys!