91 cx with 1.6?

[BLU CIVIC]

70hp...that would be the STD

[00accord44]

I'd rather have an std than a car with 70hp

[drill bit]

is there any realstic advantage to bolting on a b15 head on a d16a6 block. i was about to replace the d16 with a b16 until some one threw this at me. can some one shed some light on this for me please, thanks

[viper-blue]

Originally Posted by drill bit

is there any realstic advantage to bolting on a b15 head on a d16a6 block. i was about to replace the d16 with a b16 until some one threw this at me. can some one shed some light on this for me please, thanks

You can't bolt a b-series head on to a D-series block, or vise versa. You can bolt a D15b vtec head onto a regular d-series though. Just read the top sticky on the main page. You can find all the swaps and motor/tranny swaps possible.

[Christ]

old thread... almost a year old.

And there is no B15.. you're talking about using a D15 head on a D16, and no, unless it's Vtec, don't bother, b/c all the D-series heads EXCEPT twin cam, Vtec, and 8-valve are the same.