2000 chrysler sebring jxi convertible

[swtsue1960]

I have a 2000 chrysler sebring jxi convertible that stalls when you drive it. We took a reading and got 2 codes and replaced the two sensors it said needed to be replaced which was intake air and throttle positioning sensor. I took it for a test drive and it seemed better at first but got to a stop sign and it stalled out again. before the rpms were jumping from 1 to 4 now it stays at 1 and dont jump until you hit 50 mile per hour. can someone help me identify what the problem is with this car?

[hundahunta]

check your ground, 5v supply, and signal circuits you might also want to backprobe the tps and do a throttle sweep.




INTAKE AIR TEMPERATURE SENSOR - GRAY 2 WAY CAV CIRCUIT FUNCTION
1 K4 18BK/LB SENSOR GROUND
2 K21 18BK/RD INTAKE AIR TEMPERATURE SIGNAL


THROTTLE POSITION SENSOR - NATURAL 3 WAY CAV CIRCUIT FUNCTION
1 K4 18BK/LB (2.4L ENGINE) SENSOR GROUND
1 K6 18VT/WT (2.5L ENGINE) 5V SUPPLY
2 K22 18OR/DB THROTTLE POSITION SENSOR SIGNAL
3 K4 18BK/LB (2.5L ENGINE) SENSOR GROUND
3 K6 20VT/WT (2.4L ENGINE) 5V SUPPLY

[sunniebeech]

Was the issue found? I've changed sensor after sensor and can't find the issue. Thanks.