|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-26-2007, 05:38 PM
|
|||
|
|||
|
Fuel line replacement
I have a 97 GP GT 3.8 vin K and I need to replace the fuel line on the rear fuel rail. Does anyone have an idea how long it calls to replace and how involved it is.
Thanks -I must say JB WELD worked amazing to temporarily fix the problem until my part comes in. It was leaking badly, I cleaned off the plastic line and applied JB to the leaking area. I waited 1 1/2 hours started it up and no more leak. It has been 3 days and still holding. I have pictures of the fix but I cant figure out how to post attachments.
__________________
2004 GRAND PRIX GTP COMP G. VIN 4 : OVERKILL CUSTOM PCM, WIZAIR CAI, ZZP TRAILING ARMS, W BODY STORE LATERAL ARMS, ALL POLY/SOLID MOUNTS, STB F&R, ZZP RACE TRANS, ALT REWIRE & VOLTAGE BSTR, 180 STAT, NGK TR6, MPS with 3.4 PULLEY, PACESETTER HEADERS, 1.8 ROLLER ROCKERS, FP REWIRE,ZZP COILS/WIRES, TB SPACER, D&S ROTORS, INTERCEPTOR SCAN GAUGE, CUSTOM STAINLESS 2.5 INCH CAT BACK EXHAUST. 2004 Honda Odyssey EX-L 
|
|
#2
08-27-2007, 05:53 AM
|
||||
|
||||
|
Re: Fuel line replacement
There are repair sections available instead of replacing the entire line made by Dorman/Motormite. If it's broken somewhere in the middle, the kit will consist of a section of the plastic line and two metal serrated splice connectors. They make these repair sections for the quick-connector ends also, if you broke one changing a fuel filter or fuel pump module. These kits come with instructions, are fairly easy to do, and are much less expensive than replacing the entire line.
__________________
 Still waiting for the "good old days" I'll get to bore my future grandchildren with!
|
|
#3
08-27-2007, 05:25 PM
|
|||
|
|||
|
Re: Fuel line replacement
Thanks for the reply,
The line cracked right before the 90 degree bend going into the fuel rail closest to the fire wall. I would need the 90 degree quick disconnect. Is there a repair kit available for that. Where do I go about finding that????? Is that a kit they would have at Advanced or Autozone??? Thanks for the help
__________________
2004 GRAND PRIX GTP COMP G. VIN 4 : OVERKILL CUSTOM PCM, WIZAIR CAI, ZZP TRAILING ARMS, W BODY STORE LATERAL ARMS, ALL POLY/SOLID MOUNTS, STB F&R, ZZP RACE TRANS, ALT REWIRE & VOLTAGE BSTR, 180 STAT, NGK TR6, MPS with 3.4 PULLEY, PACESETTER HEADERS, 1.8 ROLLER ROCKERS, FP REWIRE,ZZP COILS/WIRES, TB SPACER, D&S ROTORS, INTERCEPTOR SCAN GAUGE, CUSTOM STAINLESS 2.5 INCH CAT BACK EXHAUST. 2004 Honda Odyssey EX-L
|
|
#4
08-28-2007, 10:59 AM
|
||||
|
||||
|
Re: Fuel line replacement
If it's the inlet side, it is dorman #800-059. A-Z or Advance may very well stock it
Here's a link to Dorman's fuel line repair kits. https://www.dormanproducts.com/cgi-b...om_page=search
__________________
Still waiting for the "good old days" I'll get to bore my future grandchildren with!
|
|
#5
08-29-2007, 03:37 PM
|
|||
|
|||
|
Re: Fuel line replacement
Thanks for the help!!!! I really do not want to replace the whole line so the repair kit is perfect.
-BTW the JB weld is still holding like a champ. I have driven it a lot since I made the temporary repair.
__________________
2004 GRAND PRIX GTP COMP G. VIN 4 : OVERKILL CUSTOM PCM, WIZAIR CAI, ZZP TRAILING ARMS, W BODY STORE LATERAL ARMS, ALL POLY/SOLID MOUNTS, STB F&R, ZZP RACE TRANS, ALT REWIRE & VOLTAGE BSTR, 180 STAT, NGK TR6, MPS with 3.4 PULLEY, PACESETTER HEADERS, 1.8 ROLLER ROCKERS, FP REWIRE,ZZP COILS/WIRES, TB SPACER, D&S ROTORS, INTERCEPTOR SCAN GAUGE, CUSTOM STAINLESS 2.5 INCH CAT BACK EXHAUST. 2004 Honda Odyssey EX-L
|
|
#6
08-30-2007, 04:27 PM
|
|||
|
|||
|
Re: Fuel line replacement
well the repair kit does not work the way I would hope. The one I need has all the curves in it. I may be able to bypass the curved line and put the straight one in and just angle it slightly to go over the brake fluid reservoir. The only thing I am afraid of is putting too much pressure on the existing line and cracking it. I may just keep the JB weld on for now since it is holding and have the repair kit on hand just in case??????????????
- Do you know of any other repair kit that might fit my application better????
__________________
2004 GRAND PRIX GTP COMP G. VIN 4 : OVERKILL CUSTOM PCM, WIZAIR CAI, ZZP TRAILING ARMS, W BODY STORE LATERAL ARMS, ALL POLY/SOLID MOUNTS, STB F&R, ZZP RACE TRANS, ALT REWIRE & VOLTAGE BSTR, 180 STAT, NGK TR6, MPS with 3.4 PULLEY, PACESETTER HEADERS, 1.8 ROLLER ROCKERS, FP REWIRE,ZZP COILS/WIRES, TB SPACER, D&S ROTORS, INTERCEPTOR SCAN GAUGE, CUSTOM STAINLESS 2.5 INCH CAT BACK EXHAUST. 2004 Honda Odyssey EX-L
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
